Starting your Mini Pen Interview Recorder
Step 1:
Press the switch,it begins to kines cope as sonn as being turned on.The blue light will turn on during kinecoping.
Step 2:
Press the switch again,it will begin to save data and then turn off,at this time, the light turns to yellow,reflect that the pen DVR is at sleeping status(that means do not kinescope or shut down neither)
Step 3:
If need to Kinescope again,press the switch once more,then can come back to kinescope,during this time,the light will turn to blue again.
Step 4:
Hold down the switch for 5s ,the power switch is off, after shutting down the pen DVR,the is no guide light.
Step 5:
When finish charging the battery, the light stops glittering and the yellow light keeps on ,this means that battery is fully charged.
Step 6:
It will turn off itself when the battery has been used up ,And will save the kinescoped files before automatically shutting down.
Connect to PC with USB cable
1. Connect the machine to the computer with USB cable,The machine is in the state of charging while the yellow light is twinkling.(You can also directly charge the camera using an adaptor accorded with the specifications of USB),Charging 2 hours is necessary.
2. Function as removable disk when connect the camera to PC,playback the video files stored flash via the computer.
3. Advice use the charger.
