The Aztech DSL308ER ADSL 4 Port Ethernet Router Modem uses Conexant Argon IV Chipset solution that fully complies to ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. Aztech DSL308ER also provides higher data transmission rates with ADSL2, ADSL2+, Extended Reach-ADSL support. This next generation ADSL will be providing up to 12Mbps speed and additional 600 feet reach for ADSL2 and 20Mbps speed for distances up to 5,000 feet. ADSL2+ support will provide up to 27Mbps speed.

Targeted at the residential users, it is for both the single user with Bridge mode with host based PPPoE Client or for multi-users utilizing the DSL308ER inbuilt PPPoE/A, IP routing, NAT functionality to share the ADSL link.

It comes with Stateful Packet Inspection firewall and DMZ support for a full security options against malicious hackers. With Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time. The DSL308ER supports Hardware based VPN Server/client for IP Sec, PPTP, L2TP providing security for enabling SOHO/Branch Office applications via Future firmware upgrade.

With DSL Home support for auto-provisioning through TR-069 for WAN management and TR-064 for LAN management, the DSL308ER is an ideal platform for a scalable managed solution for Telco deployment of advance services.

PRODUCT SPECIFICATIONS

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant ITU-T G.992.1 (G.dmt Annex B) Population Option ADSL2, ADSL2+, RE-ADSL compliant TR-067 Compliant Rate Adaptive modem at 32 Kbps steps ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt) AAL ATM Attributes - AAL5 Multiple PVC up to 8 support Spectral compatibility with POTS F5 OAM Loopback/Send and Receive

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support RFC2364 PPPoA Client support RFC2516 PPPoE Client support RFC2225/RFC1577 Classical IP Support Transparent Bridge Support PAP/CHAP for Password Authentication Support

Network Support

Static IP, Dynamic RIP routing support IP/TCP/UDP/ICMP/ARP Application Support Network Address Translation (NAT) Easy Connect Support Port Mapping/Forwarding NAT Application Level Gateway for popular applications DHCP Server/Relay/client DNS Relay Agent DMZ support Hardware Based IP Sec and PPTP/L2TP VPN Client/Server Support PPP Always on with configurable timeout PPP Dial on Demand Universal Plug and Play Support

Management Support

DSL Home Support with TR-069 and TR-064 Support Web Based HTTP management GUI TFTP Support for Firmware Upgrade Web Based Firmware Upgrade (Local) Soft Factory Reset Button via Web GUI Diagnostic Test (DSL, OAM, Network, Ping Test) Telnet/CLI (Read/Write) Syslog Support Firmware upgrade-able for future feature enhancement

Security Support

NAT for basic Firewall support Packet Filtering Firewall Support Stateful Packet Inspection Support Protection against Denial of Service attacks Password Authentication to Modem

HARDWARE

Conexant Argon 432 DA4-9431-PCA Network Processor Chipset Conexant Argon 432 BAZ-388I-NCA Analog Front End/Line Driver Chipset Admtek ADM6996 6 Port Auto MDI/MDI-X MAC/PHY 2 MB Flash ROM (Population Option : 4MB Flash ROM) 8 MB SDRAM (Population Option : 16MB SDRAM) Dying Gasp Support ITU K.21 Support 10KV Surge Protection Support (Population Option)

PLATFORM SUPPORT

For Ethernet   OS Independent

POWER REQUIREMENTS

Input Voltage : 9V DC +/- 10% Input Current : 1.0A

PHYSICAL SPECIFICATIONS

LED Indicators :   1 x Internet LED 1 x Power LED 1 x DSL Link Status LED 4 x Ethernet Link/Activity Status LED External Connectors :   1 x RJ-11 Telephone socket for ADSL line 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx) 1 x DC Jack for Power Input 1 x Factory Default Reset Button 1 x On/Off Power Switch Measurements :   Dimension : 189 (L) x 124 (W) x 28 (H) mm Weight : Approx. 250g

REGULATORY APPROVALS

US : FCC Part 15/68, UL 3rd Edition Australia : Australia A-Tick, C-Tick, Telstra 1149 Asia Pacific /Europe : CE (EN55022:98/EN55024: 98), IEC 60950

ENVIRONMENTAL

TEMPERATURE   Operating : 0o to 40 o Celsius 32 o to 104 o Fahrenheit   Non-Operating : -25 o to 70 o Celsius -13 o to 158 o Fahrenheit HUMIDITY   Operating : 30% to 80% Relative Humidity (Non-Condensing) Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)

NOTE : Specifications are subject to change without prior notice.